Garden Voila

Free garden planning tools

Free Gardening Calculators & Garden Planning Tools

Work out how much soil, mulch and compost to buy, how many plants fit, how much to water and what it will cost, before you spend a dollar.

  • 100% free
  • No sign-up needed
  • 40+ garden tools
  • Research-based advice
A gardener planting young seedlings in a raised garden bed

Plan your whole garden in four steps

Choose your space and crops and get a layout, a shopping list and a dated planting schedule in one go. Free, with no account.

Start the plan wizard

Try it now: how much soil do you need?

Enter your bed size and depth to get cubic feet, cubic yards and the number of bags to buy.

Open the full soil calculator

Most garden projects go wrong on paper before they go wrong in the ground. A bed comes up four inches short because the soil was guessed instead of measured. A tray of tomato seedlings goes leggy because it was started two months too early. Half a pallet of mulch sits behind the shed because nobody did the math on depth. Garden Voila exists to fix those problems before they happen. It is a free collection of gardening calculators, plant data and planning tools built for home gardeners in the United States, using the units you already buy materials in: feet, inches, cubic feet, cubic yards and gallons.

Every tool here answers one practical question. How much soil do I need? How many plants fit in this bed? How much water does the garden use each week? What will this project cost? You enter what you know, such as a length, a depth, a crop or a frost date, and the tool shows the answer along with the working behind it, so you can check the logic and adjust it for your own situation. Nothing requires an account, and the calculators update as you type.

The small calculator above is a quick soil estimate for a rectangular area. For circles, triangles, multiple beds and a full breakdown by bag size, open the full soil calculator. The rest of this page explains what each group of tools does, how they fit together, and how to get accurate numbers out of them.

What you can work out here

The tools are grouped by the kind of decision they support. You can browse them all in the tools directory, but here is how the main groups work and when to reach for each one.

Materials: soil, compost and mulch

Buying bulk materials is where most gardeners lose money, because the gap between a guess and the real figure is often 30 percent or more. The material calculators convert the size of your area and the depth you want into cubic feet and cubic yards, then into bag counts for the sizes sold at US garden centers. The soil calculator handles open ground, borders and lawns. The raised bed soil calculator fills one or many beds and splits the result into a topsoil, compost and aeration blend. The mulch calculator and compost calculator work the same way for top dressings, and the soil bag calculator and mulch bag calculator help you decide between bagged and bulk delivery.

Planting: spacing, seeds and depth

Crowded plants compete for light, water and nutrients, and they stay wet longer after rain, which invites disease. Plants spaced too far apart waste bed space you paid to build and fill. The plant spacing calculator shows how many plants fit in a given area using square, row or offset (triangular) spacing. The square foot gardening calculator does the same for gardeners who plant in one-foot grid squares. The seed quantity calculator adds germination rates so you buy enough seed without buying five packets you will never open, and the planting depth calculator tells you how deep each seed, clove or tuber should go.

Water: how much and how to deliver it

A common rule of thumb is that vegetable gardens need about an inch of water per week, from rain and irrigation combined, with more in hot, windy or sandy conditions. An inch sounds small until you convert it: one inch of water over one square foot is about 0.62 gallons, so a 100-square-foot garden needs roughly 62 gallons a week. The garden watering calculator does that conversion for your garden and crops. The drip irrigation calculator turns the weekly target into emitter counts and run times, while the rain barrel calculator and rainwater collection calculator estimate how much of that water your roof can supply for free.

Plants: what to grow and when

The plant database lists spacing, row spacing, plants per square foot, sowing depth, days to maturity and starting method for common vegetables, herbs and fruit. It is the data source behind several calculators, and it is useful on its own when you are standing in a garden center wondering how much room a zucchini really takes. The plant finder filters that data by your conditions, and the growing zone finder, frost date tool and gardening calendar handle timing.

Planning and cost

Once the individual numbers are clear, the planning tools pull them together. The garden planner helps you lay out beds and crops, and the garden cost calculator adds up materials, plants and supplies so you can set a realistic budget before the first trip to the store.

How to plan a new garden bed, start to finish

If you are building a garden from scratch, the order you make decisions in matters. Each step below feeds a number into the next, so working through them in sequence saves rework.

  1. Pick the spot and count the sun. Most fruiting vegetables, such as tomatoes, peppers, squash and beans, need at least six to eight hours of direct sun a day. Leafy greens and many herbs tolerate less. Watch the spot across a full day before you commit, because a fence or tree can shade a bed for half the afternoon.
  2. Measure the space. Record length and width in feet, and subtract paths. A garden that is 12 by 20 feet with two 2-foot paths has far less growing area than 240 square feet. The garden size calculator handles irregular shapes and path deductions.
  3. Choose in-ground or raised beds. Raised beds warm earlier in spring, drain better and let you control the soil, but they cost more to build and fill. In-ground beds are cheaper but depend on the soil you already have.
  4. Work out the soil. Use the raised bed soil calculator for framed beds or the soil calculator for amending or topping up ground beds. Add an allowance for settling.
  5. Choose crops and spacing. Pick what you want to eat, check each crop in the plant database, and use the plant spacing calculator to see how many fit.
  6. Set your timing. Find your average last spring frost date, then count back for seed starting and forward for transplanting and direct sowing.
  7. Plan the water. Estimate weekly gallons, then decide whether a hose, soaker hose or drip system makes sense for the size of the garden.
  8. Add up the cost. Total the materials, plants and supplies in the garden cost calculator before buying anything.
  9. Mulch after planting. Two to three inches of organic mulch between plants holds moisture and suppresses weeds. The mulch calculator turns that depth into bags or yards.

Why measuring first saves money

Here is a real example of where guessing goes wrong. A standard 4-by-8-foot raised bed built from 2×12 lumber stands about 11 inches tall, because a 2×12 board is actually 11.25 inches wide. Filling it to the top takes 4 × 8 × (11 ÷ 12), or about 29.3 cubic feet of soil. Fresh, loose mixes settle by 10 to 20 percent during the first season, so a sensible order is closer to 34 cubic feet, which is 17 bags of 2 cubic feet each, or about 1.25 cubic yards in bulk.

A gardener who guesses “about a yard” orders 27 cubic feet and ends up with a bed that is several inches short after it settles. One who buys 10 bags because “that looks like a lot” gets barely a third of the way up. Running the numbers takes a minute, and it is usually the difference between one trip to the store and three.

The same logic applies to mulch. Mulch is usually spread 2 to 3 inches deep, but many people buy by eye and spread it at an inch, which lets weeds through, or at 5 inches, which can smother shallow roots and keep the soil too wet. Matching purchase to depth avoids both problems.

Rule of thumb: one cubic yard of material covers about 108 square feet at 3 inches deep, 162 square feet at 2 inches, and 324 square feet at 1 inch.

Growing zones and frost dates in the US

Two pieces of location data shape almost every planting decision, and they are often confused with each other.

Your USDA plant hardiness zone describes how cold your winters get. The current USDA map, released in 2023 and based on 1991 to 2020 weather data, divides the country into 13 zones by the average coldest winter night, with each zone spanning 10°F and split into “a” and “b” halves of 5°F. Zones tell you whether a perennial, shrub or tree is likely to survive the winter where you live. That is why plant tags say things like “hardy in zones 5 to 9.”

Your frost dates describe when the growing season starts and ends. The average last spring frost and average first fall frost set the window for tender crops like tomatoes, peppers, squash and basil, which are damaged or killed by frost. Two towns in the same hardiness zone can have frost dates weeks apart because of elevation, nearby water or local terrain, so for annual vegetables the frost date matters more than the zone.

Many of the timing tools here start from your last frost date. Seed-starting dates count backward from it, and transplanting and direct sowing dates count forward from it. Average dates are averages, so keep an eye on the ten-day forecast and be ready to cover tender plants on a late cold night.

Frost dates tell you what is typical, but this week matters too. Our garden weather forecast shows the next seven days from the National Weather Service for your ZIP code, and flags freezing nights, hot days, rain and wind, with advice on what to do in the garden.

Looking for your city? Browse frost dates for 100+ US cities, each with a planting calendar and a live frost forecast.

Units and how our numbers work

All tools use US customary units, because that is how materials are sold and how most seed packets and extension guides are written. A few conversions come up again and again, and knowing them makes it easier to sanity-check any result:

  • 1 cubic yard = 27 cubic feet. Bulk soil, compost and mulch are sold by the cubic yard. Bags are sold by the cubic foot.
  • Depth is entered in inches, area in feet. The calculators divide depth by 12 to convert it to feet before multiplying.
  • 1 inch of water over 1 square foot ≈ 0.62 gallons. That is how weekly watering targets turn into gallons.
  • Common bag sizes are 0.75, 1, 1.5 and 2 cubic feet for soil, and 2 or 3 cubic feet for mulch. Always check the bag, since sizes vary by brand.
  • Bag counts are always rounded up. You cannot buy 16.9 bags, and a slightly heaped bed is better than a short one.

Where a tool depends on a typical value, such as how much soil settles or how much a cubic yard of topsoil weighs, the default is shown in the input and you can change it. If your supplier, seed packet or soil test says something different, use their figure.

Who these tools are for

The tools are written for people doing the work themselves. They also hold up for small professional jobs where a quick estimate is needed on site.

  • First-time vegetable gardeners who want to know how much to buy and when to plant, without reading a whole book first.
  • Raised bed builders working out lumber, soil volume and the best mix for a set of beds.
  • Homeowners refreshing beds and borders who need a mulch or topsoil order for the spring cleanup.
  • Small-space and container growers who need to fit the most food into a patio, balcony or side yard.
  • Homesteaders and larger growers planning rows, seed orders and water supply for a bigger plot.
  • Landscapers and handypeople who want a quick material estimate to quote from.

Accuracy and limits

Every result is an estimate built from your measurements and typical values. The math itself is exact, but the inputs rarely are: beds are not perfectly square, ground is not perfectly level, and compost from one supplier is fluffier than from another. For materials, a 5 to 10 percent cushion on top of any settling allowance covers most real-world variation.

Plant data such as spacing, days to maturity and sowing depth are typical ranges drawn from common seed catalog and university extension guidance. Individual varieties can differ widely. A determinate patio tomato and a sprawling heirloom have very different spacing needs, for example. When the seed packet gives a figure for the exact variety you are growing, trust the packet.

For anything that depends on local conditions, such as soil pH, nutrient levels, regional pests or the right varieties for your climate, your state’s Cooperative Extension service is the best free resource available. Most offer low-cost soil tests that tell you exactly what your ground needs, which is far better than adding amendments by guesswork.

Frequently asked questions

Are the gardening calculators free to use?

Yes. Every calculator, the plant database and the directory are free and work without an account. Results appear as you type, and nothing you enter is stored.

Do the tools work for gardens outside the United States?

The math works anywhere, but the tools use feet, inches, cubic yards and gallons, and timing tools refer to USDA hardiness zones and US frost dates. Gardeners in metric countries can convert their measurements first. One meter is about 3.28 feet, and one cubic meter is about 1.31 cubic yards.

How much soil do I need for a 4×8 raised bed?

A 4-by-8-foot bed that is 11 inches deep holds about 29.3 cubic feet of soil. Adding 15 percent for settling brings that to about 34 cubic feet, which is 17 bags of 2 cubic feet or about 1.25 cubic yards in bulk. The raised bed soil calculator works this out for any size.

What is the difference between a growing zone and a frost date?

A USDA hardiness zone describes how cold your winters get and tells you which perennials will survive. Frost dates describe when your growing season begins and ends and tell you when to plant tender annual vegetables. For vegetables, frost dates are the more useful of the two.

How accurate are the results?

The calculations are exact for the numbers you enter. Real-world results depend on measuring accurately and on how much the material settles. Adding 5 to 10 percent extra on top of the settling allowance covers uneven ground and measurement error.

Where does the plant data come from?

Spacing, depth and days-to-maturity values are typical ranges based on common seed catalog and university extension guidance for home gardens. Varieties differ, so when your seed packet gives a specific figure, use that instead.