Building a raised bed from lumber is easy once you know what to buy. This raised bed lumber cut list calculator tells you exactly how many boards to purchase and how to cut them. Enter the outside length and width of the bed, how tall you want it, the board size and the length of board you buy, and it gives you the cut list, the waste on each board and the corner posts if you want them.
How to use the raised bed lumber cut list
- Enter the outside length and width of the bed in feet. Four feet wide is popular because most people can reach the middle from either side.
- Enter the height you want in inches. The calculator rounds up to whole boards, so you get the next full height.
- Choose the board size. 2×6 boards are 5.5 inches wide, 2×8 are 7.25, 2×10 are 9.25 and 2×12 are 11.25.
- Choose the board length you buy so it can plan cuts and reduce waste.
- Decide on corner posts. They strengthen the corners and give you something to screw into.
How the cut list is worked out
The number of courses is the bed height divided by the board width, rounded up. Each course needs two long sides at the full length and two ends. The ends fit between the long sides, so each is three inches shorter than the bed width to allow for the thickness of the two side boards. The calculator then packs all those pieces onto boards of your chosen length, largest first, to use as few boards as possible. If a side is longer than one board, it is made from two pieces, which you should join over a post or with a backing board.
Bed height and board size
| Board | Width | Height with two courses |
|---|---|---|
| 2×6 | 5.5 in | 11 in |
| 2×8 | 7.25 in | 14.5 in |
| 2×10 | 9.25 in | 18.5 in |
| 2×12 | 11.25 in | 22.5 in |
A bed 10 to 12 inches deep is enough for many vegetables, and deeper beds suit root crops or help if the ground below is poor. To work out the soil you need to fill it, use the raised bed soil calculator.
Choosing lumber safely
- Know the wood. Rot-resistant woods such as cedar last longer but cost more. Untreated pine is cheaper but rots sooner.
- Check treated lumber tags. Do not use old railroad ties or wood treated with creosote. If you consider treated lumber, read the tag and follow your local extension guidance.
- Use exterior screws rated for outdoor use, and pre-drill near board ends to avoid splitting.
- Level the site first, and lay cardboard inside to hold back weeds before filling.
Budget the whole project with the raised bed cost calculator, and plan what to plant using the raised bed planner.
Limits of this tool
The cut list assumes a simple rectangular frame with the long sides running the full length. Real boards are sometimes shorter than their stated length, so measure before cutting. Allow a little extra for saw cuts and mistakes, and buy one spare board if the project matters.
Frequently asked questions
How many boards do I need for a 4 by 8 foot raised bed?
For two courses of 2×6, six 8-foot boards: four full-length boards for the sides, plus two boards to cut the four ends.
How tall should a raised bed be?
Ten to twelve inches suits most vegetables. Deeper beds help root crops and poor underlying soil.
Should I use treated lumber?
Read the treatment tag and follow local extension advice. Many gardeners choose untreated cedar, or accept a shorter life from untreated pine.
Do I need corner posts?
They are not required, but they strengthen the frame and give you solid wood to screw into.
Why are the end pieces shorter?
They fit between the long sides, so each is shorter by the thickness of the two side boards.