Row cover is lightweight fabric laid over garden beds, usually on hoops, to protect plants from frost, cold wind and some insects. This calculator tells you how much fabric to buy and how many hoops to use for a bed of any size. Enter the bed length and width, the hoop height, and how much fabric you want for anchoring the edges, and it returns the fabric width and length, the total area and the hoop count.
How to use the row cover fabric calculator
- Enter the bed length and width in feet.
- Enter the hoop height in inches, measured from the soil to the top of the arch. Low tunnels are commonly 12 to 24 inches tall, but choose the height your tallest plants need.
- Enter the anchor margin. This is the extra fabric on every side and at the ends that you bury or weigh down with soil, boards or sandbags. Twelve inches is a common starting point.
- Enter the hoop spacing and insertion depth. Closer hoops hold fabric better in wind. Depth is how far each end goes into the soil.
- Set the number of beds if you are covering several of the same size.
How the numbers are worked out
Fabric width is the bed width, plus the hoop height on both sides to drape over the arch, plus the anchor margin on both sides. Fabric length is the bed length plus the margin at both ends. The hoop count is the bed length divided by your spacing, rounded up, plus one for the end. Each hoop’s length is the arc over the bed, calculated as half an ellipse of your bed width and hoop height, plus the part pushed into the soil at each end. This is a fair estimate for common bent-conduit or wire hoops, but real fabric also sags, so a little extra is wise.
Choosing a row cover
| Weight | Typical use | Notes |
|---|---|---|
| Lightweight | Insect and wind protection, light frost | Lets in the most light and air |
| Medium | Frost protection in spring and fall | The most useful all-round choice |
| Heavyweight | Winter protection for hardy crops | Blocks more light, so use for dormant or hardy plants |
Fabric is usually sold in rolls of several fixed widths, so buy a roll at least as wide as the result. Heavier fabrics protect against more cold but let in less light. Labels from the maker give the temperature protection they claim, so follow the product label rather than a general rule.
Using row cover well
- Secure the edges. Wind lifts loose fabric. Bury it, or hold it with soil, boards or clips.
- Vent on warm days. Under a cover, temperatures climb quickly in sun, so open or remove it by midday when it is warm.
- Uncover for pollination. Crops that rely on pollinators, such as squash, cucumbers and strawberries, need access once they flower.
- Keep fabric off tender leaves when you can, since contact with cold fabric can transfer frost damage. Hoops solve this.
- Reuse it. Shake off soil, dry it and store it out of sun, and it can last several seasons.
Pair this tool with the growing season length calculator to see how many weeks a cover can add, and with the frost date tool to time when to put it on. To plan the bed itself, try the garden row calculator.
Limits of this tool
The results are estimates for a simple hoop tunnel over a rectangular bed. Slopes, very wide beds or tall crops may need more fabric or taller hoops, and strong wind may need heavier anchoring. Always follow the manufacturer’s instructions for the fabric and hoops you buy.
Frequently asked questions
How much row cover do I need for a 4 by 20 foot bed?
With an 18-inch hoop height and a 12-inch anchor margin, you need a piece about 9 feet wide and 22 feet long. Enter your own numbers above for exact figures.
How far apart should the hoops be?
About 4 feet is common. Use closer spacing in windy places or with heavier fabric.
Can row cover protect from frost?
It can protect against light frost by holding in a little heat, but protection depends on the fabric weight and the weather. Check the product label for the manufacturer’s claim.
Do I leave row cover on all day?
Not on warm, sunny days. Vent or remove it so plants do not overheat, and remove it for flowering crops that need pollinators.
What can I use for hoops?
Common choices are bent electrical conduit, PVC pipe, fence wire or purpose-made hoops. Pick something strong enough to hold the fabric in wind.