Garden Voila

Cold Frame Sizing Calculator

Size a cold frame for the seedling trays you want to hold.

A cold frame is a bottomless box with a clear lid that lets you start seedlings earlier, harden them off and extend harvests into fall. This cold frame sizing calculator works out how big to build one for the trays or pots you want to hold. Enter the number of trays, their size, the clearance you want and the back and front wall heights, and it returns the inside and outside dimensions, the lid size and the slope.

How to use the cold frame sizing calculator

  1. Enter how many trays or pots you want to hold.
  2. Choose the trays along the length. Three side by side makes a frame about six feet long for standard trays.
  3. Enter the tray size. A standard 1020 seedling tray is about 21 by 11 inches.
  4. Add clearance around the trays so you can fit your hands in and plants do not touch the walls.
  5. Set the wall heights. The back is higher than the front so the lid slopes toward the sun. A drop of about six inches is common.
  6. Enter the board thickness. The default of 1.5 inches matches standard lumber.

How the dimensions are worked out

The inside length is the number of trays along the length times the tray length, plus clearance on both ends. The inside width is the number of rows times the tray width, plus clearance on both sides. Add the board thickness on every side and you have the outside footprint. The lid has to cover the slope, so its depth is the diagonal across the inside width and the height drop between the back and front walls, plus the boards.

Where to put a cold frame

FactorWhat to aim for
SunFace the low side toward the sun, usually south in the US
ShelterA wall or hedge to the north blocks cold wind
DrainageLevel, well-drained ground, so water does not pool inside
AccessClose to the house, since you will open and close it often

Using a cold frame well

  • Vent every warm day. A closed frame in sun can overheat quickly and cook seedlings. Prop the lid open with a stick or use an automatic opener.
  • Close it in the evening to trap the day’s warmth, and add a blanket or extra cover in a hard freeze.
  • Water carefully. Plants inside dry out fast on sunny days but stay damp when cool.
  • Use it to harden off seedlings. See the hardening off schedule calculator.
  • Extend the season. A frame adds weeks at either end, which you can measure with the growing season length calculator.
  • Compare with row cover. For beds, the row cover fabric calculator is a lighter, cheaper alternative.

Materials

Walls can be untreated lumber, straw bales or cinder blocks. For the lid, old windows, twin-wall polycarbonate or clear plastic over a frame all work. Handle old glass with care, and avoid lumber treated with creosote.

Limits of this tool

The results are for a simple rectangular frame with a sloped lid. Add a little extra for trim, hinges and overhang so rain runs off. Check local building or HOA rules if you plan a permanent structure.

Frequently asked questions

How big should a cold frame be?

Size it to the trays you need. A frame about 6 by 2.5 feet holds six standard seedling trays.

Which way should a cold frame face?

Face the low, glazed side toward the sun, usually south in the US, with the high wall to the north.

Why is the back wall taller?

It slopes the lid toward the sun and lets rain run off.

Can a cold frame get too hot?

Yes. On sunny days even in cold weather it can overheat, so open the lid or vent it daily.

What can I use for the lid?

Old windows, twin-wall polycarbonate or clear plastic on a frame. Make sure it is clear, sturdy and fits the frame well.