When you fertilize your lawn matters more than how much you spend on fertilizer. Feed at the right time and grass grows thick, green and better able to crowd out weeds. Feed at the wrong time and you encourage weak growth, disease, weeds or nutrient runoff into waterways. The right schedule depends mainly on one thing: whether you have cool-season or warm-season grass.
Cool-season or warm-season grass?
| Cool-season grasses | Warm-season grasses | |
|---|---|---|
| Examples | Kentucky bluegrass, tall fescue, perennial ryegrass, fine fescues | Bermudagrass, zoysia, St. Augustine, centipede, Bahia, buffalograss |
| Where | North, Midwest, Northeast, Pacific Northwest, transition zone | South, Southwest, Gulf Coast |
| Main growth | Spring and fall | Summer |
| Main feeding time | Fall | Late spring through summer |
Fertilizer schedule for cool-season lawns
- Early fall (late August to September): the most important feeding. Grass recovers from summer stress, grows new roots and thickens up.
- Late fall (October to early November): an optional second fall feeding before the grass goes dormant, while it is still green. It feeds roots and gives an earlier green-up next spring.
- Late spring (around Memorial Day): a light feeding if needed. Avoid heavy early spring feeding, which pushes leafy growth at the expense of roots and can make summer stress and disease worse.
- Summer: generally skip, especially in heat and drought.
If you only fertilize once a year, make it early fall. The fall lawn fertilizer calculator works out how much product your lawn needs.
Fertilizer schedule for warm-season lawns
- Late spring: first feeding after the lawn has fully greened up and soil reaches about 65°F. Fertilizing during green-up mainly feeds weeds.
- Summer: one or two more feedings during active growth, typically six to eight weeks apart.
- Stop about six to eight weeks before your first fall frost so the grass can harden off for winter.
- Centipede and Bahia need very little nitrogen; over-feeding causes problems.
How much fertilizer to use
Lawn fertilizer rates are based on nitrogen. A typical single application is about 1 pound of actual nitrogen per 1,000 square feet, or less with quick-release products. Cool-season lawns usually need 2 to 4 pounds of nitrogen per 1,000 square feet per year in total, depending on grass type and whether clippings are left on the lawn. To convert: divide 1 by the first number on the bag. For a 25-10-10 fertilizer, that is 4 pounds of product per 1,000 square feet.
The fertilizer calculator does this math for any bag.
Tips for fertilizing correctly
- Test your soil every three to four years. A test shows whether you need phosphorus, potassium or lime, and many states restrict phosphorus on lawns unless a test shows a need. See how to test soil pH and garden lime: when and how to use it.
- Choose slow-release nitrogen for steadier growth and less risk of burning or runoff.
- Use a spreader and apply in two half-rate passes at right angles for even coverage.
- Water lightly afterward, unless the label says otherwise, to move granules into the soil.
- Sweep granules off paths and driveways back onto the grass so they do not wash into storm drains.
- Do not fertilize dormant, frozen or drought-stressed grass, or right before heavy rain.
- Leave the clippings. Mulched clippings return nutrients and reduce how much fertilizer you need.
Fertilizing with aeration and overseeding
Early fall is also the best time to aerate and overseed cool-season lawns, and a starter fertilizer helps new seed establish. See when to aerate your lawn and how to overseed a lawn, and bring every task together with our month-by-month lawn care calendar.
Common fertilizing mistakes
- Feeding too early in spring: pushes leaf growth at the expense of roots and fuels weeds.
- Fertilizing dormant or drought-stressed grass: the lawn cannot use it, and nitrogen can burn or wash away.
- Leaving granules on sidewalks and driveways: sweep them back onto the lawn so they do not wash into storm drains.
- Skipping a soil test: many lawns already have enough phosphorus. A test shows what you actually need.
- Spreading unevenly: apply half the rate in one direction and half at right angles to avoid stripes.
Should you leave grass clippings?
Yes. Clippings break down quickly and return nitrogen to the soil, which can cut your fertilizer needs by up to a quarter each year. They do not cause thatch. Mow often enough that you remove no more than a third of the blade at a time.
How to read a lawn fertilizer bag
The three numbers on the bag are the percentages of nitrogen (N), phosphorus (P) and potassium (K). Nitrogen drives green growth and is the nutrient lawns need most. Many lawn products now have zero phosphorus, and some states restrict phosphorus on established lawns because runoff harms lakes and streams, so only add it if a soil test shows a need.
Also look for the words “slow release” or “water insoluble nitrogen” (WIN). Slow-release nitrogen feeds grass gradually over six to ten weeks, with less risk of burning and less loss to rain. Quick-release products green up the lawn fast but wear off sooner and are easier to overdo. For most home lawns, a product with at least a third of its nitrogen in slow-release form is a good choice.
Organic lawn feeding options
- Compost topdressing: rake a quarter inch of fine compost over the lawn after aerating in fall.
- Organic granular fertilizers: made from feather meal, poultry litter, soybean meal or biosolids. They release nitrogen slowly as soil microbes break them down, so they work best in warm soil.
- Grass clippings: leaving them on the lawn is the simplest free fertilizer of all.
Timing for cool-season lawns: how many feedings?
The right number of applications depends on how much work you want to do and how green you want the lawn. University of Illinois Extension lays out four tiers for cool-season grasses such as Kentucky bluegrass, ryegrass and fescue:
- One application: late summer to early fall.
- Two applications: spring and late summer to early fall.
- Three applications: spring, late summer to early fall, and late season.
- Four applications: spring, early summer (irrigated lawns only), late summer to early fall, and late season.
If you do only one feeding a year, make it the late-summer to early-fall one. The late-season application is timed to about one week after the final mowing of the year.
Dates in central, northern and southern Illinois
Illinois gives actual dates, which show how much latitude shifts the calendar. In central Illinois, the spring application is in early to mid-May, the late summer to early fall one runs from August 15 to September 15, and the late-season (winterizer) feeding is in November. In northern Illinois, spring is later than central, late summer is in August and the late-season feeding is in late October to early November. In southern Illinois, spring is earlier than central, late summer is in September and the late-season feeding is in late November. These dates apply to cool-season lawns in that state; if you live elsewhere, shift them using your local extension service and the weather where you are. Our frost dates tool helps place the first and last frost on your calendar.
How much nitrogen: the numbers
Illinois suggests about 1 pound of nitrogen per 1,000 square feet (about 0.5 kg per 100 square meters, or about 5 grams per square meter) per application. Over a growing season, full-sun lawns get about 3 pounds of nitrogen per 1,000 square feet, split into two or three applications, and shade lawns get about half that amount. It advises never exceeding 1 pound of quick-release nitrogen in a single application. For the ratio on the bag, it recommends lawn fertilizers with N-P-K ratios of 3:0:2 or 4:0:2, and explains that the nitrogen percentage is the first number on the bag, so an 18-6-12 product contains 18 percent nitrogen.
How to work out how much product to buy
The University of Illinois gives the method: divide the desired nitrogen rate by the decimal nitrogen percentage, multiply by the square footage, then divide by 1,000. In its example, a 15-0-10 fertilizer on a 7,000 square foot lawn at 1 pound of nitrogen per 1,000 square feet needs about 47 pounds of product. To check: 1 divided by 0.15 is 6.67, times 7,000 is 46,667, divided by 1,000 is about 46.7 pounds. Use the same steps for your own lawn and your own bag. Measure the lawn area first, subtracting the house, beds and paths, and set your spreader according to the bag instructions.
Slow-release versus quick-release nitrogen
Illinois recommends slow-release (controlled-release) nitrogen for most lawn applications. Its advantages include more uniform growth, less chance of burning the grass and less loss to soil or air. Its disadvantages are that it may not work well in cold soil, most products are expensive and the color change may be slower. Fast-release nitrogen gives quick greening and works in cold soil, but it can cause a large growth flush, may burn the grass and is more prone to loss. A common approach is to use a blend or to keep fast-release for the cold-soil late-season feeding, but follow the product label.
Do you need phosphorus? Test first
Illinois Extension recommends focusing on nitrogen unless a soil test shows other deficiencies. Illinois soils often have adequate phosphorus, but only a soil test shows actual nutrient levels. Lawn starter fertilizers are high in phosphorus and are intended for new seeding and sod, not for established lawns. Local rules on phosphorus differ, and some places restrict it, so check what applies near you. A basic soil test from your local extension office is inexpensive and takes the guesswork out of the decision.
What too much fertilizer does
More is not better. The University of Illinois notes that over-applying nitrogen can cause excessive top growth, which may increase disease and insect problems. Sweeping granules off paths and driveways back onto the lawn, and not applying before heavy rain, also protects nearby streams and storm drains. Weed-and-feed products are a compromise on timing: in central Illinois, spring crabgrass control must go down in early April, which is too early for a spring fertilizer application, so a combined product cannot be optimal for both jobs.
Warm-season lawns are different
The Illinois page addresses only cool-season lawns, so do not use these dates for bermudagrass, zoysia or St. Augustine. Warm-season grasses are fed in their growing season, and your state extension service will publish a calendar for them. Using the cool-season fall schedule on a warm-season lawn is a common mistake.
Safety and legal note: Read and follow the fertilizer label, wear gloves and keep children and pets off treated lawns until the product has been watered in or the label allows re-entry. Do not apply fertilizer before heavy rain or onto hard surfaces, because runoff pollutes waterways. Some states and municipalities limit lawn fertilizer timing or phosphorus, so check local rules.
Fertilizing around aeration and overseeding
Feeding does not stand alone; it fits around other lawn jobs. Iowa State University Extension suggests fertilizing about one week before aerating, and says that overseeding and fertilizing can also be done after aerating. When you overseed a thin lawn, Iowa State says to apply 1 pound of actual nitrogen per 1,000 square feet about 6 weeks after the new seed germinates, which is the same 1 pound rate Illinois gives for established turf. Do not put down a heavy dose of quick-release fertilizer on new seedlings, because tender young grass burns easily; a gentle, slow-release product at the label rate is safer. For the full process, see our guides on aerating and overseeding a lawn, and use our garden watering calculator to plan the watering that should follow every application.
Quick reference: a simple yearly plan
- Do the minimum: one slow-release feeding in late summer to early fall.
- Average lawn: spring plus late summer to early fall, about 1 pound of nitrogen per 1,000 square feet each time.
- Full-sun, irrigated lawn: three or four feedings, including the late-season winterizer about a week after the last mowing. Illinois gives about 3 pounds of nitrogen per 1,000 square feet per season for full sun, so with four feedings use less than 1 pound each time.
- Shady lawn: about half the seasonal nitrogen of a sunny one.
These figures come from the University of Illinois guidance for cool-season turf. Always check the bag, because each product states its own spreader setting and rate.
Sources and further reading
- Lawn Management through the Seasons, Penn State Extension
- Five fall tips for cool-season lawn care, University of Illinois Extension
- Easy Lawn Care Calendar, Washington State University Extension
Free printable: the Year-Round Garden & Preserving Planner
Planting dates for 24 crops, monthly tasks, blanching times, canning safety numbers and a winter storage chart in one 8-page PDF. Enter your email to download it instantly and get our seasonal garden newsletter.
No spam. Unsubscribe any time. We never sell your email.
Frequently asked questions
What is the best month to fertilize a lawn?
For cool-season grass, September. For warm-season grass, late spring once the lawn has fully greened up, usually May.
Should I fertilize my lawn in early spring?
Usually not heavily. Early spring feeding favors top growth over roots in cool-season grass and feeds weeds in warm-season lawns that have not greened up yet.
Can I fertilize before rain?
Light rain helps water fertilizer in, but heavy rain soon after application can wash it away. Check the forecast.
How often should you fertilize a lawn?
Two to four times a year is typical, depending on grass type, soil and whether you leave clippings on the lawn.
Reviewed October 2026. Sources: University of Illinois Extension, fertilizing your lawn



