Garden Voila
Lawn Care

Lawn Care Calendar: What to Do Month by Month

A month-by-month lawn care calendar for cool-season grass, plus a seasonal plan for warm-season lawns: when to mow, fertilize, aerate, overseed and control weeds.

Illustration of a lawn mower on a striped lawn next to a calendar

A healthy lawn is mostly about doing the right job at the right time. This month-by-month lawn care calendar sets out what to do and when, from spring cleanup and mowing to the fall feeding, aeration and overseeding that matter most. It is written for cool-season grasses, which cover most of the northern half of the US, with a separate summary for warm-season lawns in the South.

Dates are a guide. Grass responds to soil temperature, not the calendar, so shift tasks a few weeks earlier in warm regions and later in cold ones. Check your local dates with the frost dates by ZIP code tool.

Lawn care calendar for cool-season grass

January and February

  • Stay off frozen or frosty grass; footprints damage the blades.
  • Service the mower: sharpen the blade, change the oil, replace the spark plug and air filter.
  • Avoid piling salty snow onto the lawn.

March

  • Rake lightly to lift matted grass and remove winter debris once the lawn has dried out.
  • Test the soil every three to four years; see how to test soil pH.

April

  • Apply crabgrass preventer (pre-emergent) when soil reaches about 55°F, often around when forsythia finishes blooming. Skip it on areas you plan to seed.
  • Start mowing when grass reaches about 4 inches, cutting no more than one-third of the blade at a time.
  • Repair small bare spots with seed if you missed fall seeding.

May

  • Light fertilizer feeding around late May if the lawn needs it. See when to fertilize your lawn.
  • Spot-treat broadleaf weeds while they are actively growing.
  • Raise mowing height to 3 to 3.5 inches as temperatures rise.

June

  • Mow high and leave the clippings.
  • Water deeply, about 1 inch a week including rain, early in the morning.
  • Watch for grubs if patches lift like carpet.

July and August

  • Mow high, keep the blade sharp and avoid mowing in midday heat.
  • Either water consistently or let the lawn go dormant (brown) in drought; healthy cool-season lawns recover when rain returns. Do not switch back and forth.
  • Avoid fertilizing and weed killers in heat.
  • Plan fall renovation and buy seed in late August.

September: the most important month

  • Fertilize: the key feeding of the year.
  • Core aerate compacted or high-traffic lawns. See when to aerate your lawn.
  • Overseed thin areas, ideally by mid-September. See how to overseed a lawn.
  • Dethatch if thatch is more than 1/2 inch.

October

  • Control broadleaf weeds such as clover and dandelions; fall is when herbicides work best. See how to get rid of clover.
  • Mulch fallen leaves into the lawn with the mower, or rake them for leaf mold. Do not let thick layers smother the grass.
  • Keep mowing as long as the grass grows.

November and December

  • Optional late-fall fertilizer while the grass is still green, before the ground freezes.
  • Lower the final mowing slightly, to about 2.5 inches, to discourage snow mold.
  • Clean up leaves, drain fuel or add stabilizer, and store the mower.

Cool-season quick reference

TaskBest timeSecond choice
FertilizeSeptember, plus late October to NovemberLate May (light)
AerateLate August to SeptemberApril to May
OverseedMid-August to mid-SeptemberApril to May
Crabgrass preventerApril (soil about 55°F)None
Broadleaf weed controlSeptember to OctoberMay to June
Mowing height3 to 3.5 inches most of the year2.5 inches for the final fall cut

Lawn care calendar for warm-season grass

SeasonMain tasks
Late winter (February to March)Crabgrass preventer; scalp dormant Bermuda lightly; service the mower
Spring (April to May)Begin mowing; first fertilizer after full green-up and soil about 65°F
Early summer (May to June)Aerate and seed or plug bare areas during active growth
Summer (June to August)Feed every six to eight weeks; water deeply; watch for chinch bugs and grubs
Fall (September to October)Final feeding six to eight weeks before first frost; optional ryegrass overseeding for winter color
WinterLawn is dormant; keep traffic off; control winter weeds

Tools to plan your lawn year

Lawn tasks by soil temperature

Calendar dates shift from year to year, but soil temperature does not lie. A cheap soil thermometer pushed 2 to 4 inches deep tells you when to act.

Soil temperatureWhat it means
About 50°FCool-season grass starts growing; begin mowing
55°F for several daysCrabgrass is about to germinate; apply pre-emergent before this
50 to 65°FBest range for seeding cool-season grass
65 to 70°F and risingWarm-season grass greens up; best time to seed or sod it
Above 80°FCool-season grass slows down; avoid feeding and seeding it

Adjusting the calendar for your region

The month-by-month tasks above follow a typical year. In the far North, push spring tasks two to four weeks later and fall tasks a little earlier. In the Deep South and desert Southwest, warm-season tasks start sooner and run later. In the transition zone, where both grass types grow, follow the calendar for the grass you actually have. Your local first and last frost dates are a reliable anchor for timing fall seeding and the end of the mowing season.

A month-by-month cool-season calendar from Missouri

University of Missouri Extension publishes a monthly schedule for cool-season lawns in its central region, and notes that timing may vary by two weeks or more depending on region and weather. Shift it earlier in the north and later in the south.

  • March: apply broadleaf herbicides for perennial and winter annual weeds, overseed thin spots early if you missed last fall, power rake or mow before growth starts, and test the soil.
  • April: fertilize at 0.5 to 1 pound of nitrogen per 1,000 square feet, preferably slow-release, start mowing at recommended heights, aerate if thatch is heavy or soil is compacted, apply crabgrass preventer by April 15, and begin top-dressing low spots.
  • May: stop nitrogen applications after May 1, apply post-emergence broadleaf herbicides, start post-emergence crabgrass, goosegrass or nutsedge control near the end of the month if needed, and treat first-brood sod webworm about 10 days after the major moth flight.
  • June: water as needed, about 6 inches deep and infrequently, raise mowing height half an inch to an inch if the stand is thin, use 2.5 to 3 inches for taller turf, scout for sod webworm and leave clippings unless excessive.
  • July: mow frequently and avoid stressful midday mowing, irrigate 2 to 3 times per week as soil absorbs it for about 1 inch per week including rain, water between 6 and 10 a.m. in hot, humid conditions, and check brown areas for white grubs, treating if 5 to 10 grubs appear per square foot.
  • August: prepare the seedbed for fall seeding or sodding, and test soil if fertility is unknown. Soak dormant lawns in the last week to start fall growth.
  • September: fertilize at 1 to 1.5 pounds of nitrogen per 1,000 square feet with a balanced lawn fertilizer, which Missouri calls the most important feed of the year. Seed or sod new lawns early and keep the soil moist, aerate where needed, dethatch, overseed thin spots and apply broadleaf herbicides in late month.
  • October and November: mow at regular heights until growth stops, apply lime only if a soil test indicates need, fertilize moderately after days cool to about 50 degrees F (10 C), remove leaves, keep the soil moist but not wet going into winter, and service the mower.

Mowing heights by grass type

Missouri gives seasonal heights in inches. Tall fescue: 2 to 3.5 in spring, 3 to 4 in summer and 2.5 to 3.5 in fall. Kentucky bluegrass: 1.5 to 2.5 in spring, 2 to 3.5 in summer and 1.5 to 2.5 in fall. Perennial ryegrass: 1.5 to 2.5 in spring, 2.5 to 3.5 in summer and 1.5 to 2 in fall. Creeping red and chewings fescue: 1 to 2 in spring, 2 to 3 in summer and 1 to 2 in fall. Hard and sheep fescue: 1.5 to 2.5 in spring, 2 to 3 in summer and 1.5 to 2.5 in fall. It recommends using summer heights for shaded turf and never removing more than one-third of the green leaf area in one mowing. To convert, 1 inch is 2.5 cm, so tall fescue in summer is about 7.5 to 10 cm.

How much nitrogen per year

Missouri puts a standard rate at about 1 pound of nitrogen per 1,000 square feet per application and lists annual totals: 2 to 3 pounds for common Kentucky bluegrass, 4 to 5 pounds for higher-quality bluegrass, 2 pounds for red fescue, 2 to 3 pounds for bluegrass and red fescue mixes, and 3 to 4 pounds for tall fescue or ryegrass. To work out the product you need for 1 pound of nitrogen per 1,000 square feet, divide 100 by the nitrogen percentage on the label. A 20-percent nitrogen bag therefore needs 5 pounds per 1,000 square feet.

Minnesota: a calendar of date windows

The University of Minnesota Extension presents its calendar as windows, listed with the best timing first, followed by acceptable alternatives. Mowing runs late April to early November, and watering May to late October. Pre-emergence crabgrass control goes on mid-April to mid-May before crabgrass emerges, and post-emergence control mid-May to early July on small, visible crabgrass. Seeding is best early August to late September, with mid-November and May to early June as alternatives. Fertilizing is early August to mid-October, or May to late June. Aerating is mid-August to mid-October, or late April to May. Dethatching is mid-August to September. Broadleaf weed control is September to late October, or May to late June. Sodding has three windows: early May to June, mid-August to late October and late June to the second week of August.

The same page lists useful cautions: avoid fertilizing in hot mid-summer, which can cause lasting lawn damage; avoid spraying weed control when it is warm, since this raises the risk of damaging the lawn; do not apply crabgrass pre-emergence herbicide in the fall, because crabgrass does not develop until late spring or early summer; and roots can be damaged when soil temperatures exceed 85 degrees F (29 C).

Tall fescue and fine fescue in Maryland

University of Maryland Extension shows how the calendar shifts for fescue lawns in the mid-Atlantic. For tall fescue, the best seeding and aeration window is late summer to early autumn. Skip spring fertilizing if you fertilized the previous autumn, though weak, sparse, heavily used or crabgrass-prone lawns may get one spring application from April to about mid-May. Apply in late summer to mid-autumn as soil tests indicate, make any final application before November 15 and do not fertilize in summer. Core-aerate compacted areas from mid-August to mid-October, ideally before overseeding. Apply pre-emergent herbicide in March to April and use herbicide only as a last resort. It recommends skipping watering of established lawns in summer unless drought is prolonged, and then watering only enough to keep roots alive. The final cut of the season should be about half an inch shorter than usual.

For fine fescue, Maryland says young first-year lawns are mowed 2 to 3 times a month and established lawns 1 to 2 times a month in spring and autumn. Alternatively, wait until seed heads turn brown and then mow at 4 to 5 inches. In summer mow only once a month if the lawn is not dormant, and only after rain or irrigation. Fine fescue needs less nitrogen than tall fescue, and it advises avoiding broadleaf herbicides in spring, which can cause yellowing.

Warm-season lawns: zoysia

Warm-season grasses run on a different calendar. The Maryland page lists zoysia as dormant from mid-October to mid-May, with a best planting window of late spring to early summer. In late spring, before new growth appears, it recommends mowing low (about 1 inch) to remove brown winter foliage, and dethatching in early summer if thatch is over half an inch thick. Core-aerate from mid-May to June. Fertilize once the lawn greens up in late spring or early summer, a second time in summer no later than mid-August, and do not fertilize in autumn. Do not use post-emergent herbicides on zoysia lawns less than one year old. It also notes that fertilizer must not be used to melt ice, which violates Maryland law.

Using the calendars together

No single calendar fits every lawn. Pick the one for your grass type, then move the dates earlier or later to match your local frost dates, which you can look up with our frost dates by ZIP code tool. Plan water with the garden watering calculator. The pattern that holds across all three sources is the same: for cool-season grasses, the big jobs are in late summer and early fall.

Sources and further reading

Free printable: the Year-Round Garden & Preserving Planner

Planting dates for 24 crops, monthly tasks, blanching times, canning safety numbers and a winter storage chart in one 8-page PDF. Enter your email to download it instantly and get our seasonal garden newsletter.

No spam. Unsubscribe any time. We never sell your email.

Frequently asked questions

What is the most important time for lawn care?

Early fall for cool-season lawns, when fertilizing, aerating and overseeding all give the best results. For warm-season lawns, late spring and early summer.

When should I start mowing in spring?

When grass reaches about 4 inches tall, usually in April for cool-season lawns. Remove no more than one-third of the blade at a time.

When should I apply crabgrass preventer?

When soil temperatures reach about 55°F in spring, often around the time forsythia finishes flowering. Do not use it where you plan to seed.

What should I do to my lawn in winter?

Very little: stay off frozen grass, keep salty snow off the lawn and service your mower for spring.

Reviewed October 2026. Sources: University of Missouri Extension, cool-season lawn calendar, University of Minnesota Extension, lawn care calendar, University of Maryland Extension, lawn maintenance calendar